| 

Adaptability is an adjective eminently suited to Plumpton Red Lazonby.
This medium-grained red
sandstone is strong enough in all planes to be used equally effectively
as a paving material and as
vertical masonry product. Its base colour of salmon pink is enhanced
by the brightness of quartz
grains to give a sparkle that makes the stone one of the first choices
for designers looking to use a
natural stone with life.
Plumpton Red Lazonby can be used as a cladding or paving aterial
at thicknesses which encourages exciting
design solutions. The combination of exceptional physical performance
and intensity of colour is unique.
Specification
guide Quarried from Lazonby Fell, 3 miles north
of Penrith, Plumpton Red Lazonby is a medium-grained sandstone,
uniformly salmon pink in colour with a sparkle due to the presence
of quartz grains. Extremely resistant to
abrasion and weathering, Plumpton Red Lazonby can be used for
most building applications including paving.
Beds are up to 1500 mm deep and long, wide blocks can be obtained.
These figures should only be used as indications of the future
performance of the stone. The information given is for
guidance only and is subject to alteration without notice.
We recommend customers contact Stancliffe Stone Company Ltd
to ensure details are currently valid. Test results may not
be representative of the whole quarry and are provided for
comparison purposes only.
  
Specifications of
Plumpton Red Lazonby Sandstone
|
Stone
|
Plumpton Red Lazonby
Sandstone
|
Quarry
|
Scratchmill Scar Quarry
|
Supplier
|
Stancliffe Stone
|
Physical Performance
of Plumpton Red Lazonby Sandstone
|
Geological type
|
Permian Sandstone
|
Colour/texture
|
Salmon red / medium grained
|
Maximum sizes |
Please consult |
Petrographic description |
Sub-Arkose Sandstone |
Apparent density |
2292 Kgm (BSEN 1936:1999) |
Open Porosity |
13.3% (BSEN 1936:1999) |
Water absorption |
3.2% (by wt) (BSEN 13755:2002) |
Flexural strength |
1.89 MPa (BSEN 13161:2001) |
Breaking strength |
2.54 MPa (BSEN 12371:2001) |
Compressive strength |
62 MPa (BSEN 1926:1999) |
Breaking load at dowel |
1006 N (BSEN 13364:2002) |
Stone Variations
The variation shown above is characteristic of Plumpton Red
Lazonby.
This is not something that can be controlled but it can be managed.
Please make contact to discuss specific project requirements.
Stone being a natural product may vary significantly in colour
and
texture within the same range of stone. Descriptions given in
this
website concerning the colour of the products and the images
depicting their colour are approximate only. It is strongly recommended
that customers request physical samples of the colour and texture
of
stone available from any particular range before placing orders.
Examples Of Use
|
Atlantic House, Holborn
Viaduct, London
|

|
1 Great St Helens Street, London
|

|
|